Ressources

Best budget precision knife sharpener for beginners?

novembre 5, 2024 li chaofeng

Quel est le meilleur aiguiseur de couteaux de précision à petit budget pour les débutants ?

Vous êtes débutant et vous souhaitez aiguiser efficacement vos couteaux de cuisine ? Vous souhaitez obtenir des résultats professionnels sans la complexité et le coût élevé associés aux systèmes d'affûtage...

Lire maintenant

mars 12, 2025 Carry Young

Pierres à aiguiser en résine ou diamant électrolytique : ce que vous devez savoir
Ce guide explore la science derrière les pierres à aiguiser en résine et en diamant électrolytique, détaillant comment leurs processus de fabrication uniques influencent les performances.

Lire maintenant
février 25, 2025 yangkairui

Le guide ultime des pierres à aiguiser diamantées liées à la résine
Dans le monde de l'affûtage des couteaux, choisir la bonne pierre à aiguiser est crucial pour une tenue du tranchant et une précision optimales. Les pierres diamantées à liant résine s'imposent rapidement comme la référence pour les professionnels comme pour...
Lire maintenant
novembre 5, 2024 li chaofeng

Quel est le meilleur aiguiseur de couteaux de précision à petit budget pour les débutants ?
Vous êtes débutant et vous souhaitez aiguiser efficacement vos couteaux de cuisine ? Vous souhaitez obtenir des résultats professionnels sans la complexité et le coût élevé associés aux systèmes d'affûtage avancés ? Si tel est le cas, les aiguiseurs à...
Lire maintenant
novembre 4, 2024 li chaofeng

FAQ sur les opérations courantes avec RX008 et RX009
Q1 : La pierre ne peut pas être serrée fermement R : Tout d'abord, vérifiez si la poignée est en place ou non (la vis sur la poignée peut être desserrée pour ajuster la position de la poignée) Deuxièmement, vérifiez...
Lire maintenant
novembre 4, 2024 li chaofeng

Ruixin Pro RX008 vs. RX009 : lequel vous convient le mieux ?
Choisir le bon taille-crayon à angle fixe peut faire toute la différence dans votre expérience d'affûtage. Si vous envisagez un taille-crayon Ruixin Pro, vous hésitez peut-être entre les modèles RX008 et RX009. Bien que tous deux soient d'excellentes options, ils...
Lire maintenant

78%

(32)

(3)

(1)

(2)

Perfect resin bonded diamond stones

I will immediately congratulate the Ruixin Pro Team for bringing to the market high performance resin bonded diamond stones at a fair price.
I have been producing and sharpening knives for years, I sharpen mainly by hand with fixed angle sharpening systems because they offer the highest precision and sharpening quality. I own and have tried almost all the stones available on the market from Natural to Synthetic Japanese, Diamond or CBN. These stones offer a cutting speed and scratch finishing significantly greater than famous Japanese stones at half the price. They certainly offer greater durability and above all require less maintenance because they will remain flat much longer. They offer comparable performance to other resin bonded stones such as venev, jende, Poltava etc. at a more favorable price. Believe me, there is no point in wasting money to have the same result. The only thing that other stones offer is a greater thickness of abrasive and therefore greater durability. A piece of advice for the Ruixin Team, propose as an alternative a set like this but with 3mm of abrasive at a slightly higher price and let users choose what to buy, I think they will all buy a set with more abrasive because these stones are truly exceptional for their performance, cutting speed, durability, scratch finish in sharpening and above all ease of maintenance. Do not focus too much on the lateral space, I know you have received more feedback complaining about this but in reality it is not a problem, on the contrary it helps to preserve damage on the handles in sharpening and probable errors that many beginners could make, offer more thickness of the abrasive and you will see that even the framed lateral edge will no longer be a problem for anyone. For those who are doubtful, buy this set without thinking too much and you will be truly amazed, you will have the possibility of obtaining excellent results on par with much more expensive sets.

Nice addition to the stones I already have

These stones brigge the gap between diamond stones/lapping films and strops. Good aluminium bases, performing well but not used long enough to say anything about lifespan.

Absolutely incredible value

I was unsure but hopeful about how these were going to perform since I've had to spend gobs of money to get quality stones in the past. I was extremely pleasantly surprised. I have worked with Vinevs, KDTU, PDT, Jende to name a few and these hold their own against their resin bonded stones as far as cutting ability, feedback and consistency. I even experienced less loading at the higher grits than I have with Vinev. The scratch pattern is excellent and I was able to get dull knives just as sharp as is possible. The grit progression is consistent and well spaced.

I will point out that they have a rather small working layer and the material doesn't reach the ends of the 6 inch base BUT they had to do something to make these affordable and I'm sure glad they did. 1mm of working material will last you a decade with regular sharpenings and I don't notice the shorter length of material when sharpening on a guided angle system at all. I would love to see a super low grit profiling stone in one of the lines like an 80 or 120 but the 200 is definitely fully capable of reprofiling, It's just nice to have extra oomph sometimes.

I have tried both this pro version as well as the premium version and I do like them both but I actually prefer the pro. It may be the feedback that I like more with the flat surface but the raised pattern on the premiums is extremely efficient and that might be your jam. It's an interesting innovation. I also appreciate the slightly thicker working layer of the pro. I hope to try all of their offerings eventually.

I also have to mention their customer service which is top notch. I don't just mean it was good at the basic level but they went above and beyond to help me with my first order, answering any questions, and even followed up after our initial chat. I was worried I wouldn't get the case, spray bottle and conditioning stone since I was mixing and matching from 3 different lines but they assured me they'd include them, adding to the value.

We don't all have $400 to drop on a set of stones even If it will last a lifetime. There was a huge hole in the market for a quality budget resin bonded diamond stone and I'm glad to see someone filling it. Maybe we'll see them expand into CBN next! I would love to see that, or perhaps hybrid bonds. I expect good things whatever direction they go. I will be spreading the word, including in the extensive yet close nit online world of sharpening, and I see that I'm not alone in that (shoutout to Lacey). I only hope we don't start seeing the stock issues we've seen with Vinev and KDTU! If you're considering these, don't hesitate. (I am unaffiliated with the brand, I just appreciate the product and the value)

Review was written after sharpening a dozen knives of varyings angles and steels, soft to super hard. I will try to post another review with some photos and updates after I use it a while longer.

Not wide enough and wrong screws.

I bought this upgrade to to fix the issue with flexing thin bladed "Fillet knife".

But the width of the clamp is disappointingly not wide enough, just a couple centimeter wider than the RX008 clamp. Extend the fixture at least 4-5 centimeter in each direction and it will become a world leading sharpening clamp.

The clamp is to high so the stone is touching both the jaw and the rounded screw head, why not choose a flat head torx screw.

I like the idea of the RX009 clamp and if the above issues is addressed it will be a world class clamp IMHO.

Not great

Expensive for how flimsy it is.

Thanks for sharing your thoughts. Sorry to hear that the product didn’t meet expectations. If there’s anything specific we can help with—whether it’s an issue you experienced or something you’d like to clarify—please feel free to reach out.

1 2 3

Ressources

Quel est le meilleur aiguiseur de couteaux de précision à petit budget pour les débutants ?

Pierres à aiguiser en résine ou diamant électrolytique : ce que vous devez savoir

Le guide ultime des pierres à aiguiser diamantées liées à la résine

Quel est le meilleur aiguiseur de couteaux de précision à petit budget pour les débutants ?

FAQ sur les opérations courantes avec RX008 et RX009

Ruixin Pro RX008 vs. RX009 : lequel vous convient le mieux ?

Ajouté à votre panier :

Let customers speak for us

Langue

Langue

Quel est le meilleur aiguiseur de couteaux de précision à petit budget pour les débutants ?

Pierres à aiguiser en résine ou diamant électrolytique : ce que vous devez savoir

Le guide ultime des pierres à aiguiser diamantées liées à la résine

Quel est le meilleur aiguiseur de couteaux de précision à petit budget pour les débutants ?

FAQ sur les opérations courantes avec RX008 et RX009

Ruixin Pro RX008 vs. RX009 : lequel vous convient le mieux ?

Langue

Langue

Let customers speak for us